Integrated DC Servo Motor with Driver Built-in

 Integrated DC Servo Motor With Driver Developed-in

57IV90/57IV130/57IV180 Functions
one.Operating voltage: DC input voltage 15VDC to 50VDC ,suggest voltage is 36V
two.The max ongoing output recent is 10A, the max peak recent is 22A (3 instances overload ability) 
three.Acceptable differential or single-finished pulse / route command, have 3 control manner of position, velocity and torqe
four.Employing FOC magnetic situation management technologies and place vector pulse width modulation (SVPWM) shut-loop management engineering
5.The variety of pulses for each cycle (subdivision) can be established by the debug application or the dial swap environment(electronic equipment ratio)
6.Have three sorts of 90w,130w and 180w DC brushless servo motor to decide on.
seven.Have safety of overvoltage, undervoltage, overcurrent and tolerance,and many others.
eight.Solitary / double pulse method, the pulse valid edge can be choose.
9.The max pulse frequency of manage instruction is 500KHz (manufacturing facility default is 200KHz)
10.Pulse, route and enable signal input interface amount is four.5 to 28V appropriate
eleven.With serial RS232 / RS485 debugging function, but need to have to use our particular serial debugging cable 
twelve.Overall performance: clean pace, small overshoot ,tiny tracking error, reduced warmth of motor and driver

Driver Product And Choice Xihu (West Lake) Dis.

Motor Type  57IV90 57IV130 57IV180
Rated power(W) 90W 130W 180W
Vector Maximum Current 16A 18A 22A
Body Length(MM) 106.2 0.five 126.2 0.5 146.2 0.5
Operation Voltage 15-50Vdc,36Vdc recommend 
Overvoltage Protection Voltage 68Vdc±2
Control Method 32 bits DSP vector FOC control technology
Pulse Limit Frequency 500KHz(factory default 200KHz)
Defense Overcurrent, overvoltage, undervoltage and tracking error tolerance alarm
Input Signal  Pulse, direction and enable differential / single-ended interface signal,
interface level 4.five-28Vdc compatible, no need external current limiting resistor
Output Signal  Alarm / in-position signal OC output, the output capacity is100mA, need external
pull-up resistor, the maximum pull up voltage is 24Vdc
Electronic Gear Ratio Default 4000 / rev, through the DIP switch or debug software setting subdivision
(200-51200)
Position Error Control Accuracy ±1 Pulse
Speed Control Accuracy  ±2 rpm
Maximum  Acceleration 100 rpm/ms

Dialing Swap Configurations

Pulse/Rev. SW1 SW2 SW3 SW4
Default ON ON ON ON
800 OFF ON ON ON
1600 ON OFF ON ON
3200 OFF OFF ON ON
6400 ON ON OFF ON
12800 OFF ON OFF ON
25600 ON OFF OFF ON
51200 OFF OFF OFF ON
1000 ON ON ON OFF
2000 OFF ON ON OFF
4000 ON OFF ON OFF
5000 OFF OFF ON OFF
8000 ON ON OFF OFF
ten thousand OFF ON OFF OFF
20000 ON OFF OFF OFF
40000 OFF OFF OFF OFF

Subdivision accuracy (digital equipment ratio) :When SW1, SW2, SW3, SW4 are ON, the push makes use of the inner default micro-stage subdivision, the default interior subdivision of the driver is 400Pulse / rev, and the electronic equipment ratio can also be established by the debugging software. SW5 set the motor route,when turnON, the motor turns clockwise (CW),when turn OFF, the motor turns counterclockwise(CCW). SW6 management method selection, whenON, the motor enters the self-test method,producing 1 CZPT and reverse revolution, has been repeated until finally exit self-take a look at mode, the exterior handle sign is invalid at self check method, whenOFF, the motor exits self-take a look at manner,then the exterior control signal is valid.

Mechanical Construction Dimension

 Driver mode Motor body length(mm) Driver thickness(mm) Integrated motor driver length(mm)
57IV90 76 30.two 106.2
57IV130  96 thirty.2 126.2
57IV180  116 thirty.2 149.2

Note : All over is typically used, and we can customize according to your ask for or decide on the suitable model for you, please explain to us pursuing parameters: present, voltage, holding torque, physique length,the software spot.

Software
Ideal for all kinds of little and medium-sized automation equipments and instruments. These kinds of as: laser tools, healthcare tools, 3D printer, modest and medium-sized engraving device, electronic processing gear, automated crawling products, specific CNC equipment tool, packaging equipment and robotic. It is particularly beneficial for end users who anticipate reduced sounds and substantial speed applications.

Packaging and delivery
one.Outer packing: CZPT export carton with required delivery marks
2.Inner packing: Water-resistant packing with shock absorbing EPE and cardboard surrounded 
3.As for each the clients specifications

Our service
one.Working time : eight:00 a.m – 10:00 p.m .Any queries, please tell us freely, we will be reply you asap.
two.Direct time : For samples, two to 5 times will be Okay. For mass production, the direct time depend on the quantities you need to have.
three.Warrantity period : 18 months and Daily life-prolonged maintenance service for the item.
four.We settle for items customise.

FAQ
Q1: How to decide on the ideal stepper or servo motor?
A1: There are serveral crucial items: measurement, size, holding torque, voltage, existing and so forth.Soon after affirm them and informed us, we can select the ideal 1 for you.

Q2: Any other strategies to finalize the design?
A2: Confident, you can send us the model you are utilizing, we can aid you find the appropriate 1.

Q3:How to ensure the Quality of CZPT Elements?
A3: We have the built-in method for industrial components top quality control. We have IQC (incoming quality control), IPQCS (in procedure top quality control segment), FQC (final good quality handle) and OQC (out-going quality control) to manage each procedure of industrial areas prodution.

This fall:What’s the Benefit of Your Parts for Business Goods? 
A4:1.The benefit of our merchandise is the aggressive charges, quickly delivery and higher high quality. Our
staff are liable-oriented, welcoming-oriented,and diligent-oriented. Our merchandise are showcased by strict tolerance, clean complete and extended support time.
2.Before we ship out the products,we examine them much more than 3 times.

Speak to

 

Integrated DC Servo Motor with Driver Built-in